Progressivecavityparts.com

E012G1L PC Pumps and PC Pump Parts

Progressive Cavity Sludge Dewatering Pump

The Millennium E012G1L Heavy Duty PC Pump is ideal for high viscosity liquids with heavy waste solids such as filter press sludge and centrifuge sludge removal. The E012G1L's flow rate of 12 gallons/100 revolutions @ 0 to 88 GPM coupled to its high temperature resistance of up to 350° degrees Fahrenheit makes it an ideal solution for your industrial heavy-duty pumping needs.

The E012G1L is a standard ANSI flanged pump design manufactured with high strength cast Iron pump casings and designed in 1, 2 and up to 4 stages for 85, 170, %and 350 psi discharge pressures. Standard suction and discharge flange size for the E012G1L is 4".

*Neither Progressivecavityparts.com nor its parent companies nor their replacement aftermarket progressive cavity pump parts are representative, affiliated or associated with Moyno®, Tarby®, Netzsch®, Continental®, Seepex®, Roper® or Allweiler® or their respective parent corporations. All part numbers, product lines and/or descriptions are for reference purposes only.

The Millennium Series low shear and gentle pumping action enables it to pump delicate fluids and not emulsify the liquid making it an ideal polymer pump or oil/water separation pump. Solids handling capability of up to up to 50 by weight allows even the toughest application to be pumped.

The E012G1L aftermarket replacement progressive cavity pump parts work as 100% Drop-in replacements for the Tarby® Century 5 series and Moyno® 2000 Series of Progressive Cavity Pumps.

Download informational PDF's below

• 

  E012G1L Pump Casings and Supports

  E012G1L Series Pump Casings and Supports in Cast Iron, Steel and Stainless Steel are available for your pumping requirements. Pumps can be assembled with a variety of materials for a customized pumping solution for you. Contact us for details.

• 

  E0122G1L Pump Stators

  Stators are available in many elastomer materials such as Buna, natural rubber, EPDM and Viton.

• 

  E012G1L Pump Rotors

  Rotors are typically hardened tool steel or 316 stainless steel with a hard chrome plating specification and are available in 1, 2 and up to 4 stages for 85, 170, and 350 psi discharge pressures. The Millennium's modular design comes with a positively sealed, hardened gear joint assembly, hardened tool steel rotors or stainless steel rotors both with hard chrome plating for long-life.

• 

  E012G1L Pump Parts Kits

  The Millennium E012G1L Progressive Cavity Pump parts are available in both kit and single parts.