The G090G1L Progressive Cavity Pump is ideal for high viscosity liquids and heavy waste solids and other abrasive pumping applications such as (RAS) Raw Activated Sludge removal in water treatment facilities. The G090G1L's flow rate of 90 gallons/100 revolutions @ 293 to 405 GPM coupled to its high temperature resistance of up to 350° degrees Fahrenheit makes it an ideal solution for your industrial heavy-duty pumping needs.
The G090G1L is a standard ANSI flanged pump design manufactured with high strength cast Iron or 316 Stainless Steel pump casings and designed in 1, 2 and up to 4 stages for 85, 170, and 350 psi discharge pressures. Standard suction and discharge flange size for the G090G1L is 8".
The Millennium Series low shear and gentle pumping action enables it to pump delicate fluids and not emulsify the liquid making it an ideal polymer pump or oil/water separation pump. Solids handling capability of up to up to 50% by weight allows even the toughest applications to be pumped.
The G090G1L replacement progressive cavity pump parts work as drop in replacements for the Tarby® Century 5 series and Moyno® 2000 Series of Progressive Cavity Pumps.
Download informational PDF's below
*Neither Progressivecavityparts.com nor its parent companies nor their replacement aftermarket progressive cavity pump parts are representative, affiliated or associated with Moyno®, Tarby®, Netzsch®, Continental®, Seepex®, Roper® or Allweiler® or their respective parent corporations. All part numbers, product lines and/or descriptions are for reference purposes only.
G090G1L CDQ Progressive Cavity Pump Casings and Supports
G090G1L Series Pump Casings and Supports in Cast Iron, Steel and Stainless Steel are available for your pumping requirements. Pumps can be assembled with a variety of materials for a customized pumping solution for you. Contact us for details.
G090G1L CDQ Progressive Cavity Pump Stators
Stators are available in many elastomer materials such as Buna, natural rubber, EPDM and Viton.
G090G1L CDQ Progressive Cavity Pump Rotors
Rotors are typically hardened tool steel or 316 stainless steel with a hard chrome plating specification and are available in 1, 2 and up to 4 stages for 85, 170, and 350 psi discharge pressures. The Millennium's modular design comes with a positively sealed, hardened gear joint assembly, hardened tool steel rotors or stainless steel rotors both with hard chrome plating for long-life.
G090G1L CDQ Progressive Cavity Pump Parts Kits
The Millennium G090G1L Progressive Cavity Pump parts are available in both kit and single parts.