1G090G1L PC Pump

Buna Nitrile Stator/CP Steel Rotor/Packing Seal

The G090G1L Heavy Duty Progressive Cavity Pump is ideal for abrasive pumping applications such as (RAS) Raw Activated Sludge removal in water treatment facilities. The G090G1 has a flow rate of 90 gallons/100 revolutions @ 293 to 405 GPM coupled to its high temperature resistance of up to 350° degrees Fahrenheit.

The pump rotor is made from hardened tool steel or corrosion-resistant stainless steel and then coated with hard chrome plating for increased life. The Pump stator is injection molded rubber.

The G090G1L is a standard ANSI flanged pump design manufactured with high strength cast Iron or 316 Stainless Steel pump casings and designed in 1, 2 and up to 4 stages for 85, 170, and 350 psi discharge pressures. The pumps positive sealed universal joints are heavy-duty gear joints that keep the lubricant in and dirt and other foreign contaminants out during operation.

• Series: Millennium G090G1L
• Flow Range: 293 - 405 GPM
• Pressure Range: 85 - 350 PSI
• Part Material: Steel/Buna Nitrile
• Millennium Series Pumps and parts are direct aftermarket replacements for the following *OEM brand series.
• 

*Neither Progressivecavityparts.com nor its parent companies nor their replacement aftermarket progressive cavity pump parts are representative, affiliated or associated with Moyno®, Tarby®, Netzsch®, Continental®, Seepex®, Roper® or Allweiler® or their respective parent corporations. All part numbers, product lines and/or descriptions are for reference purposes only.

Download informational PDF's below