Join our mailing list!



  Home > Justice Series >

2LJ10 Progressive Cavity Hopper Pump
2LJ10 Progressive Cavity Hopper Pump
 
Sold Individually $16,598.00
Freight Options: Truck Freight Only

Availability:: Most items ship in 1-5 business days
Product Code: JP100004

Part Information: Technical Specs:
 

Justice 2LJ10

2-Stage Progressive Cavity Hopper Pump

The 2LJ10 Justice Series Open Hopper Progressive Cavity Pump from Liberty process Equipment, Inc. represents a well utilized low-flow pumping solution for viscous solutions with high solids contents like sludges, slurries, wine must, pulp and paper and adhesives and other low-flowable pumping mediums that centrifugal pumps have difficulty pumping.

The 2LJ10 Series Flow rates of 18.8 GPM/per 100 Revolutions (52 GPM to 84 GPM) at 225 PSI are standard through the range of the series. are standard through the range of the series. Please contact us if you have questions about the flow rate of a particular pump model before ordering.

The Justice Series 2LJ10 offers a heavy-duty auger mated to a rotor and stator. The large rectangular feed hopper design easily accommodates your pumping medium while the non-pulsating design of the product produces a low-shear flow that conveys your medium along effortlessly. Solids in suspension of up to 50% are accommodated by the Auger design.

The modular design of the Justice 2LJ10 Series Open Hopper Progressive Cavity pump is a hardened pinned-joint drive assembly with a body available in steel and internal wetted components in either stainless steel or hardened tool steel with hard chrome plating.

Rotors and Stators for the Justice 2LJ10 Series are available in 1, 2, and 3 stages for applications with 75, 150, and 225 PSI discharge pressures with stators available in Buna Nitrile, Viton, EPDM and Natural Rubber. The standard seal design is a set of packing with a lantern ring and flush connections. Mechanical Seal options are readily available.

The Liberty 2LJ10 Progressive Cavity Pump parts are direct aftermarket replacements that dimensionally interchange with the Moyno® J10 Series, and the Tarby® TJ10 Series.*

  • Part Material: Steel/Buna Nitrile
  • Flow Range: 52 - 84 GPM
  • Pressure Range: 0 - 225 PSI
  • This works for the following pump series
  • Justice Series Progressive Cavity PumpsIcon SpacerJ Series Progressive Cavity PumpsCentury 4 Series Progressive Cavity Pumps

*Neither Progressivecavityparts.com nor its parent companies nor their replacement aftermarket progressive cavity pump parts are representative, affiliated or associated with Moyno®, Tarby®, Netzsch®, Continental®, Seepex®, Roper® or Allweiler® or their respective parent corporations. All part numbers, product lines and/or descriptions are for reference purposes only.

2LJ10 CDQ - 2 Stage Progressive Cavity Hopper Pump

Download informational PDF's below

JL10 Pump Information2JL10 Flow Rate Curves2JL10 Pump Dimensional Drawings

Additional Products
LL10 PC Pump Radial Grease Seal LL10 PC Pump Bearing Lock Nut LL10 PC Pump Bearing Cover Plate LL10 PC Pump Bearing Housing
Sold Individually $32.00

Add
Sold Individually $24.00

Add
Sold Individually $134.00

Add
Sold Individually $956.00

Add
LL10 PC Pump Radial Grease Seal LL10 PC Pump Bearing Lock Nut LL10 PC Pump Bearing Cover Plate LL10 PC Pump Bearing Housing
LL10 PC Pump Packing Gland LL10 PC Pump Suction Body Support LL10 PC Pump Lantern Ring LL10 PC Pump Thrust Bearing
Sold Individually $148.00

Add
Sold Individually $330.00

Add
Sold Individually $134.00

Add
Sold Individually $205.00

Add
LL10 PC Pump Packing Gland LL10 PC Pump Suction Body Support LL10 PC Pump Lantern Ring LL10 PC Pump Thrust Bearing
LJ10 Intermediate Drive Shaft - Steel LJ10 Auger - Steel 2LL10 PC Pump Stator LL10 PC Pump Drive Pin Retaining Screw
Sold Individually $768.00

Add
Sold Individually $755.00

Add
Sold Individually $960.00

Add
Sold Individually $38.00

Add
LJ10 Intermediate Drive Shaft - Steel LJ10 Auger - Steel 2LL10 PC Pump Stator LL10 PC Pump Drive Pin Retaining Screw
LJ10 Con-Rod Pin Retainer - Steel LL10 PC Pump Packing Set LL10 PC Pump Reducer LL10 PC Pump Bearing Spacer
Sold Individually $170.00

Add
Sold Individually $184.00

Add
Sold Individually $390.00

Add
Sold Individually $50.00

Add
LJ10 Con-Rod Pin Retainer -  Steel LL10 PC Pump Packing Set LL10 PC Pump Reducer LL10 PC Pump Bearing Spacer
LL10 PC Pump Bearing Lock Washer LJ10 Drive Shaft - Steel 2LL10 PC Pump Rotor LJ10 Rotor Pin - Steel
Sold Individually $13.00

Add
Sold Individually $1,356.00

Add
Sold Individually $1,796.00

Add
Sold Individually $65.00

Add
LL10 PC Pump Bearing Lock Washer LJ10 Drive Shaft - Steel 2LL10 PC Pump Rotor LJ10 Rotor Pin - Steel
LJ10 Intermediate Shaft Pin - Steel LJ10 Packing Gland Insert - Steel LL10 PC Pump Thrust Grease Seal LL10 PC Pump Radial Bearing
Sold Individually $71.00

Add
Sold Individually $135.00

Add
Sold Individually $34.00

Add
Sold Individually $206.00

Add
LJ10 Intermediate Shaft Pin - Steel LJ10 Packing Gland Insert -  Steel LL10 PC Pump Thrust Grease Seal LL10 PC Pump Radial Bearing

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Justice Series
Justice Series > LJ10 Series